

中文 English English



中文 English

Back



News center

Company News Industry news

Check category



Homepage

Industry news

What are the common contents of the dashboard

Categories:Industry news
Author:
Origin:
Time of issue:2023-08-16 14:24
Views:

(Summary description)1. Oil pressure gauge The oil pressure gauge is an instrument that shows the oil pressure in kPa (kilopascals). The oil pressure gauge sensor is a piezoresistive sensor that is threaded to the engine oil line. The oil pressure pushes the contact piece to move on the resistance, so that the resistance value changes and affects the amount of current passing through the meter to ground, driving the pointer to swing. Since the oil pressure has a certain pressure range, in order to be clear and clear, there are many cars with oil pressure gauges indicated by indicators, if the engine is still on when running, it means that the engine lubrication system may not be normal. 2. Water temperature gauge A water temperature gauge is an instrument that displays the temperature of cooling water in °C (degrees Celsius). Its sensor is a thermistor type sensor that is threaded to the engine cooling waterway. The thermistor determines the amount of current flowing through the windings of the water temperature gauge coil, which drives the meter pointer to swing. In the past, the cooling water of car engines was used as tap water, and many car engine cooling systems used special coolant, so it was also called coolant temperature gauge. 3. Fuel gauge The fuel gauge is an instrument that displays the amount of oil in the tank, the unit is L (liters), the pointer points to "F", indicating full oil, pointing to "E", indicating no oil; There are also 1/1, 1/2, 0 to indicate full oil, half tank of oil and no oil, respectively. There are two coils in the fuel gauge, one on the "F" and one side of "E", the sensor is a variable resistor controlled by the height of the float, and the change in resistance determines the strength of the magnetic field lines of the two coils, which determines the direction of deflection of the pointer. 4. Water temperature gauge and fuel gauge The water temperature gauge and fuel gauge are also indicated by indicator lights, the water temperature indicator is bright to indicate that the water temperature is high, and the fuel indicator light is bright to indicate that the fuel is near the low point, as an auxiliary reminder.

What are the common contents of the dashboard

(Summary description)1. Oil pressure gauge

The oil pressure gauge is an instrument that shows the oil pressure in kPa (kilopascals). The oil pressure gauge sensor is a piezoresistive sensor that is threaded to the engine oil line. The oil pressure pushes the contact piece to move on the resistance, so that the resistance value changes and affects the amount of current passing through the meter to ground, driving the pointer to swing. Since the oil pressure has a certain pressure range, in order to be clear and clear, there are many cars with oil pressure gauges indicated by indicators, if the engine is still on when running, it means that the engine lubrication system may not be normal.

2. Water temperature gauge

A water temperature gauge is an instrument that displays the temperature of cooling water in °C (degrees Celsius). Its sensor is a thermistor type sensor that is threaded to the engine cooling waterway. The thermistor determines the amount of current flowing through the windings of the water temperature gauge coil, which drives the meter pointer to swing. In the past, the cooling water of car engines was used as tap water, and many car engine cooling systems used special coolant, so it was also called coolant temperature gauge.

3. Fuel gauge

The fuel gauge is an instrument that displays the amount of oil in the tank, the unit is L (liters), the pointer points to "F", indicating full oil, pointing to "E", indicating no oil; There are also 1/1, 1/2, 0 to indicate full oil, half tank of oil and no oil, respectively. There are two coils in the fuel gauge, one on the "F" and one side of "E", the sensor is a variable resistor controlled by the height of the float, and the change in resistance determines the strength of the magnetic field lines of the two coils, which determines the direction of deflection of the pointer.

4. Water temperature gauge and fuel gauge

The water temperature gauge and fuel gauge are also indicated by indicator lights, the water temperature indicator is bright to indicate that the water temperature is high, and the fuel indicator light is bright to indicate that the fuel is near the low point, as an auxiliary reminder.

Categories:Industry news
Author:
Origin:
Time of issue:2023-08-16 14:24
Views:

1. Oil pressure gauge

The oil pressure gauge is an instrument that shows the oil pressure in kPa (kilopascals). The oil pressure gauge sensor is a piezoresistive sensor that is threaded to the engine oil line. The oil pressure pushes the contact piece to move on the resistance, so that the resistance value changes and affects the amount of current passing through the meter to ground, driving the pointer to swing. Since the oil pressure has a certain pressure range, in order to be clear and clear, there are many cars with oil pressure gauges indicated by indicators, if the engine is still on when running, it means that the engine lubrication system may not be normal.

2. Water temperature gauge

A water temperature gauge is an instrument that displays the temperature of cooling water in °C (degrees Celsius). Its sensor is a thermistor type sensor that is threaded to the engine cooling waterway. The thermistor determines the amount of current flowing through the windings of the water temperature gauge coil, which drives the meter pointer to swing. In the past, the cooling water of car engines was used as tap water, and many car engine cooling systems used special coolant, so it was also called coolant temperature gauge.

3. Fuel gauge

The fuel gauge is an instrument that displays the amount of oil in the tank, the unit is L (liters), the pointer points to "F", indicating full oil, pointing to "E", indicating no oil; There are also 1/1, 1/2, 0 to indicate full oil, half tank of oil and no oil, respectively. There are two coils in the fuel gauge, one on the "F" and one side of "E", the sensor is a variable resistor controlled by the height of the float, and the change in resistance determines the strength of the magnetic field lines of the two coils, which determines the direction of deflection of the pointer.

4. Water temperature gauge and fuel gauge

The water temperature gauge and fuel gauge are also indicated by indicator lights, the water temperature indicator is bright to indicate that the water temperature is high, and the fuel indicator light is bright to indicate that the fuel is near the low point, as an auxiliary reminder.

Previous: What does a dashboard do?

Next: When a dashboard fails, how to troubleshoot it?

Previous: What does a dashboard do?

Next: When a dashboard fails, how to troubleshoot it?

其他资讯

16 2023-08

What does a dashboard do?

The instrument panel is a device that reflects the working conditions of each system of the vehicle, which mainly includes fuel indicators, washing fluid indicators, electronic throttle indicators, front and rear fog lights and alarm lights, which can monitor the status of the car at any time. The car dashboard is a device that reflects the working conditions of each system of the vehicle, and the conventional instruments of the general car include speed odometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging meter, etc. Car instrument is an important interface for information exchange between the driver and the car, with the development of automotive electronic technology, the amount of information about the driving conditions and institutions and parts increases significantly, and the driver is driving the vehicle, more, more timely understanding of whether the various parameters of the car and the engine are normal, in order to take timely measures to prevent accidents.

See more information 

16 2023-08

What are the common contents of the dashboard

1. Oil pressure gauge The oil pressure gauge is an instrument that shows the oil pressure in kPa (kilopascals). The oil pressure gauge sensor is a piezoresistive sensor that is threaded to the engine oil line. The oil pressure pushes the contact piece to move on the resistance, so that the resistance value changes and affects the amount of current passing through the meter to ground, driving the pointer to swing. Since the oil pressure has a certain pressure range, in order to be clear and clear, there are many cars with oil pressure gauges indicated by indicators, if the engine is still on when running, it means that the engine lubrication system may not be normal. 2. Water temperature gauge A water temperature gauge is an instrument that displays the temperature of cooling water in °C (degrees Celsius). Its sensor is a thermistor type sensor that is threaded to the engine cooling waterway. The thermistor determines the amount of current flowing through the windings of the water temperature gauge coil, which drives the meter pointer to swing. In the past, the cooling water of car engines was used as tap water, and many car engine cooling systems used special coolant, so it was also called coolant temperature gauge. 3. Fuel gauge The fuel gauge is an instrument that displays the amount of oil in the tank, the unit is L (liters), the pointer points to "F", indicating full oil, pointing to "E", indicating no oil; There are also 1/1, 1/2, 0 to indicate full oil, half tank of oil and no oil, respectively. There are two coils in the fuel gauge, one on the "F" and one side of "E", the sensor is a variable resistor controlled by the height of the float, and the change in resistance determines the strength of the magnetic field lines of the two coils, which determines the direction of deflection of the pointer. 4. Water temperature gauge and fuel gauge The water temperature gauge and fuel gauge are also indicated by indicator lights, the water temperature indicator is bright to indicate that the water temperature is high, and the fuel indicator light is bright to indicate that the fuel is near the low point, as an auxiliary reminder.

See more information 

16 2023-08

When a dashboard fails, how to troubleshoot it?

1. Stitch removal method When the reading of the automobile electrical instrument is abnormal, through analysis and inference, it may be that there is a tie fault in the wire inside the sensor or between the sensor and the indicator instrument, and the stitch removal method is often used for inspection. That is, by removing the wires on the relevant terminal posts, the cause and location of the fault are judged. Taking the electromagnetic fuel gauge as an example, when the internal iron or float of the sensor is damaged, and the wire between the sensor and the fuel gauge is ironed, no matter how much oil is in the fuel tank, after the ignition switch is turned on, the fuel gauge pointer always points to "0", and the wire removal method can be used to check. First, remove the wire on the sensor, if the fuel gauge pointer moves towards "I" at this time, the internal iron or float of the sensor is damaged; If the pointer still points to "0", remove the sensor terminal post wire on the fuel gauge, and if the meter pointer moves towards "I", tie the wire between the fuel gauge and the sensor; If the pointer is still not moving, it may be damage to the inside of the fuel gauge or an open circuit in its power cord. 2. Iron method When the reading of the automobile electrical instrument is abnormal, through analysis, it is inferred that the sensor iron may be poor or damaged, and the wire between the sensor and the indicator instrument has a circuit breaking fault, the iron tie method is often used for inspection. By connecting the relevant terminal posts with wires, the cause and location of the fault can be determined. After the ignition switch is turned on, the fuel gauge pointer points to "I" for the electromagnetic fuel gauge regardless of the amount of oil stored in the tank; For bimetal fuel gauges, the fuel gauge pointer points to "0", which indicates that the corresponding instrument sensor may have a bad iron, damage, or a broken wire between the sensor and the indicator instrument, at this time, the iron method can be used to check. First of all, connect the sensor to the terminal post with the wire, if the pointer turns, it means that the sensor is damaged or the tie is poor; If the pointer does not rotate, the wire can be used to tie the wire post of the indicator instrument to the sensor, if the pointer rotates, the wire between the sensor and the indicator instrument has an open circuit fault; If the pointer still does not turn, it indicates that the meter is internally damaged or its power cord is open. 3. Short connection method 在其它电器仪表工作均正常、只有与稳压器相连的仪表（如燃油表、电磁式水温表等）不工作时，可利用短接法进行检查。用导线将稳压器的输入、输出端短接，这时与稳压器相连的仪表指针若立即偏转，则为稳压器内部存在故障。

See more information 



0086-0576-83728635

Contact us

咨询电话：13566428688

邮箱：1913482190@qq.com

地址：浙江省台州市路桥区路桥街道新安南街689号







Tel：13566428688
contact

E-amil：1913482190@qq.com
contact

Address: No. 689, Xin'an South Street, Luqiao Street, Luqiao District, Taizhou City, Zhejiang Province